Passipedia EN

User Tools

Site Tools

You are here: Passipedia - The Passive House Resource » Certification » The Passive House Classes: Classic, Plus and Premium » Classic, Plus, Premium: The Passive House classes and how they can be reached
certification:passive_house_categories:classic-plus-premium

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
certification:passive_house_categories:classic-plus-premium [2024/04/18 22:00] – [Introduction] jgrovesmithcertification:passive_house_categories:classic-plus-premium [2024/04/18 22:11] (current) – jgrovesmith
Line 6: Line 6:
 ===== Introduction ===== ===== Introduction =====
  
-Anyone who has built or lives in a Passive House building already has this part of the energy transition taken care of. After all, the low energy demand in a Passive House can sustainably come from regional energy sources. The supply structure is transitioning from fossil sources to renewables at an encouragingly rapid pace. The conventional primary energy assessment systems for energy demand in buildings are based on old supply systems and do not work in the new one with an increasing share of renewables. The Passive House Institute therefore developed a new evaluation system based on renewable primary energy ([[basics:energy_and_ecology:primary_energy_renewable_per|PER, Primary Energy Renewable]]). Based on the achieved level of energy efficiency and the amount of renewable energy supply, Passive House certification is available in three classes: +Anyone who has built or lives in a Passive House building already has this part of the energy transition taken care of. After all, the low energy demand in a Passive House can sustainably come from regional energy sources. The supply structure is transitioning from fossil sources to renewables at an encouragingly rapid pace. The conventional primary energy assessment systems for energy demand in buildings are based on old supply systems and do not work in the new one with an increasing share of renewables. The Passive House Institute therefore developed a unique evaluation system based on renewable primary energy ([[basics:energy_and_ecology:primary_energy_renewable_per|PER, Primary Energy Renewable]]). Based on the achieved level of energy efficiency and the amount of renewable energy supply, Passive House certification is available in three classes: 
  
   * The **Passive House Classic**, which is the traditional Passive House   * The **Passive House Classic**, which is the traditional Passive House
Line 17: Line 17:
  
 \\ \\
- +===== PER and Passive House Classes =====
-\\ +
-===== PER methodology in a nutshell =====+
  
 Most people probably think of a single number when they hear the term Passive House: 15 kWh/(m²a). It describes the maximum demand for annual heating energy for compliance with the Passive House Standard. This figure is the bases of all of the classes because it provides a starting point by limiting the amount of useful energy made available for heating purposes indoors. Useful energy demand for cooling, airtightness, and criteria for comfort and hygiene are also the same for all three classes.  Most people probably think of a single number when they hear the term Passive House: 15 kWh/(m²a). It describes the maximum demand for annual heating energy for compliance with the Passive House Standard. This figure is the bases of all of the classes because it provides a starting point by limiting the amount of useful energy made available for heating purposes indoors. Useful energy demand for cooling, airtightness, and criteria for comfort and hygiene are also the same for all three classes. 
Line 25: Line 23:
 But heating energy demand does not tell the whole story; after all, heating energy demand is roughly equal to hot water demand in a Passive House. Demand for household electricity is usually much higher. A building’s total energy demand – including the energy needed to provide the building with final energy – therefore also needs to be taken into account. This is where the Passive House classes come into play. They divide buildings into classes or categories based on their total renewable primary energy demand and their renewable primary power production (Figure 1).  But heating energy demand does not tell the whole story; after all, heating energy demand is roughly equal to hot water demand in a Passive House. Demand for household electricity is usually much higher. A building’s total energy demand – including the energy needed to provide the building with final energy – therefore also needs to be taken into account. This is where the Passive House classes come into play. They divide buildings into classes or categories based on their total renewable primary energy demand and their renewable primary power production (Figure 1). 
  
-[{{:picopen:20150311_passivehouseclasses_press_release_phi.jpg?600|**Figure 1: The new Passive House classes of Classic, Plus, and Premium. Requirements for PER demand and renewable energy generation. Classic is the current Passive House Standard. Higher classes require lower renewable primary energy demand and additional renewable energy generation.**}}]+[{{:picopen:20150311_passivehouseclasses_press_release_phi.jpg?600|**Figure 1: The Passive House classes of Classic, Plus, and Premium. Requirements for PER demand and renewable energy generation. Higher classes require lower renewable primary energy demand and additional renewable energy generation.**}}]
  
 ==== Generation and demand remain separated ==== ==== Generation and demand remain separated ====
Line 68: Line 66:
  
 We still have a gap to close before reaching Passive House Premium. Simply optimizing building services will not get us there; we have to make changes to the building envelope. Instead of the original window frames of efficiency class phB, Passive House windows of class phA can be used to reduce annual demand for heating energy down to only 8 kWh/(m²TFA*a). In combination with heat recovery from shower water and optimized hot water distribution as in variant 1c, the roof can be completely covered with 123 square meters of photovoltaics as shown in variant 3b. Then, demand comes in at 30 kWh/(m²TFA*a) to fulfill Passive House Premium. However, generation is still too low at 88 kWh/(m²ground*a), even though twice as much energy is produced as is needed. One option is to add PV to the garage roof or southern façade of the building; alternatively, residents could invest in a community wind turbine. If a mere three-kilowatt stake is purchased in a local community wind farm (equivalent to 1/500 of a modern onshore wind turbine), the Passive House Premium level is reached, and nearly three times the amount of energy consumed is produced. We still have a gap to close before reaching Passive House Premium. Simply optimizing building services will not get us there; we have to make changes to the building envelope. Instead of the original window frames of efficiency class phB, Passive House windows of class phA can be used to reduce annual demand for heating energy down to only 8 kWh/(m²TFA*a). In combination with heat recovery from shower water and optimized hot water distribution as in variant 1c, the roof can be completely covered with 123 square meters of photovoltaics as shown in variant 3b. Then, demand comes in at 30 kWh/(m²TFA*a) to fulfill Passive House Premium. However, generation is still too low at 88 kWh/(m²ground*a), even though twice as much energy is produced as is needed. One option is to add PV to the garage roof or southern façade of the building; alternatively, residents could invest in a community wind turbine. If a mere three-kilowatt stake is purchased in a local community wind farm (equivalent to 1/500 of a modern onshore wind turbine), the Passive House Premium level is reached, and nearly three times the amount of energy consumed is produced.
 +
 +\\
  
 ===== Traunstein day care center, architects: Architekturwerkstatt Valentin ===== ===== Traunstein day care center, architects: Architekturwerkstatt Valentin =====
Line 86: Line 86:
  
 To generate the 120 kWh/(m²a) of renewable primary energy needed for Passive House Premium, 157 square meters of PV would need to be installed, thereby covering 63 percent of the roof. It is harder to reduce energy demand to 30 kWh/(m²a) of renewable primary energy. In the heating system chosen, a kilowatt-hour of offset heating energy would only reduce the heat pump’s COP. Therefore, it’s better to take another look at lighting. LED lights of utmost efficiency can be installed throughout the building, and electrical efficiency increased in general. Because there is no shower, heat recovery from shower water would not increase efficiency – but the use of energy-saving taps would save about one kilowatt-hour of PER. And when windows of efficiency class phA are used, the Passive House Premium level is reached. To generate the 120 kWh/(m²a) of renewable primary energy needed for Passive House Premium, 157 square meters of PV would need to be installed, thereby covering 63 percent of the roof. It is harder to reduce energy demand to 30 kWh/(m²a) of renewable primary energy. In the heating system chosen, a kilowatt-hour of offset heating energy would only reduce the heat pump’s COP. Therefore, it’s better to take another look at lighting. LED lights of utmost efficiency can be installed throughout the building, and electrical efficiency increased in general. Because there is no shower, heat recovery from shower water would not increase efficiency – but the use of energy-saving taps would save about one kilowatt-hour of PER. And when windows of efficiency class phA are used, the Passive House Premium level is reached.
 +
 +\\
  
 ===== Office complex for the Erdinger Moos wastewater association, architects: Architekturwerkstatt Vallentin ===== ===== Office complex for the Erdinger Moos wastewater association, architects: Architekturwerkstatt Vallentin =====
Line 99: Line 101:
 ---- ----
  
-==== References ====+===== References =====
  
 [Feist 2014] Feist, Wolfgang: [[basics:passive_house_-_assuring_a_sustainable_energy_supply:passive_house_the_next_decade|Passive House – the next decade]]. In: Feist, Wolfgang (Hrsg.): Tagungsband zur 18. Internationalen Passivhaustagung 2014 in Aachen. PHI Darmstadt 2014 [Feist 2014] Feist, Wolfgang: [[basics:passive_house_-_assuring_a_sustainable_energy_supply:passive_house_the_next_decade|Passive House – the next decade]]. In: Feist, Wolfgang (Hrsg.): Tagungsband zur 18. Internationalen Passivhaustagung 2014 in Aachen. PHI Darmstadt 2014
  
 [Krick 2012] Krick, Benjamin: Zukünftige Bewertung des Energiebedarfes von Passivhäusern. In: Feist (Hrsg.): Protokollband des Arbeitskreises kostengünstige Passivhäuser Nr. 46: Nachhaltige Energieversorgung mit Passivhäusern. PHI Darmstadt 2012 [Krick 2012] Krick, Benjamin: Zukünftige Bewertung des Energiebedarfes von Passivhäusern. In: Feist (Hrsg.): Protokollband des Arbeitskreises kostengünstige Passivhäuser Nr. 46: Nachhaltige Energieversorgung mit Passivhäusern. PHI Darmstadt 2012
 +
 +[Krick 2015] Krick, Benjamin: Classic, Plus, Premium: The new Passive House classes and how they can be reached In: Feist, Wolfgang (Hrsg.): Tagungsband zur 19. Internationalen Passivhaustagung 2015 in Leipzig. PHI Darmstadt 2015
  
 [Ochs 2013] Ochs, Dermentzis, Feist: Energetic and Economic Optimization of the Renewable Energy Yield of Multi-Storey PHs. In Feist, Wolfgang (Hrsg.): Tagungsband zur 17. Internationalen Passivhaustagung 2013 in Frankfurt/Main. PHI Darmstadt 2013 [Ochs 2013] Ochs, Dermentzis, Feist: Energetic and Economic Optimization of the Renewable Energy Yield of Multi-Storey PHs. In Feist, Wolfgang (Hrsg.): Tagungsband zur 17. Internationalen Passivhaustagung 2013 in Frankfurt/Main. PHI Darmstadt 2013
 +
 +----
 +
 +====== See also ======
 +
 +[[basics:energy_and_ecology:primary_energy_renewable_per]] - Passipedia Landing Page
 +
 +[[certification:passive_house_categories]]
  
certification/passive_house_categories/classic-plus-premium.1713470453.txt.gz · Last modified: 2024/04/18 22:00 by jgrovesmith