planning:building_services:heating_and_dhw:heating:heat_pumps:sound_generation_dispersion_and_proofing_in_heat_pumps
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revision | |||
planning:building_services:heating_and_dhw:heating:heat_pumps:sound_generation_dispersion_and_proofing_in_heat_pumps [2018/06/22 12:08] – [Introduction] cblagojevic | planning:building_services:heating_and_dhw:heating:heat_pumps:sound_generation_dispersion_and_proofing_in_heat_pumps [2018/06/22 12:09] (current) – [Introduction] cblagojevic | ||
---|---|---|---|
Line 5: | Line 5: | ||
When analysing potential sound paths, the cause of the noise, i.e. the excitation source, should always be considered first. At this point, sound proofing measures can be put into practice most effectively and with the least effort and are therefore preferable to secondary sound protection measures. In the case of heat pumps, the excitation sources are the compressor, the ventilators, | When analysing potential sound paths, the cause of the noise, i.e. the excitation source, should always be considered first. At this point, sound proofing measures can be put into practice most effectively and with the least effort and are therefore preferable to secondary sound protection measures. In the case of heat pumps, the excitation sources are the compressor, the ventilators, | ||
- | [[planning: | + | [[planning: |
[[planning: | [[planning: | ||
- | [[planning: | + | [[planning: |
- | [[planning: | + | [[planning: |
===== Summary ===== | ===== Summary ===== |
planning/building_services/heating_and_dhw/heating/heat_pumps/sound_generation_dispersion_and_proofing_in_heat_pumps.1529662121.txt.gz · Last modified: 2018/06/22 12:08 by cblagojevic